Blog and News
FAQ
ADVERTISING
2026 Liposome Extruder Guide
2026 Liposome Extruder Guide

Genizer 2026 Liposome Extruder Selection Guide cover showing membrane extrusion and uniform liposome illustration, from 1 mL/min to 200 L/h.
Genizer's 2026 Liposome Extruder Selection Guide presents a compact product framework for membrane-based liposome processing across development and production needs. The portfolio covers manual, jacketed, online, and integrated extrusion configurations, with processing scales spanning from 1 mL/min to 200 L/h. The system family is designed around controlled membrane extrusion, sanitary construction, scalable operation, and compatibility with Genizer Track-Etched Membranes.
HandExtruder and Jacketed Liposome Extruder
Genizer HandExtruder and Jacketed Liposome Extruder comparison with model ranges, gas-driven extrusion, temperature control, and 316L construction.
For small-volume work, HandExtruder supports reciprocating syringe operation with HandExtruder-1mL, HandExtruder-1mL-RT, HandExtruder-2.5mL, and HandExtruder-2.5mL-RT models. The compact setup is suited to formulation screening and low-volume liposome preparation. The Jacketed Liposome Extruder extends membrane extrusion to temperature-controlled batches through inert-gas-driven operation and a jacketed vessel design. Available models include GJE-10mL, GJE-100mL, GJE-800mL, GJE-3000mL, and GJE-10000mL, with maximum pressure ratings of 500 psi or 800 psi depending on model size. The 316L sanitary construction supports high-temperature sterilization.
Online Liposome Extruder and Integrated System
Genizer Online Liposome Extruder and Liposome Extruder System with 2,000 psi pressure, 20-200 L/h flow range, and intelligent control.
The Online Liposome Extruder is available as GOE-25mL, GOE-200mL, GOE-1000mL, GOE-8L, and GOE-20L, covering batch volumes from 25 mL to 20 L. Maximum operating pressure is 2,000 psi, and the GOE-20L can be configured with an electric lifting lid. For continuous and flexible processing, the Liposome Extruder System combines microjet coupling, extrusion, and intelligent control. Pressure, temperature, and flow can be coordinated within one platform, with independent, parallel, or series operation. The integrated system supports a flow range of 20–200 L/h and a maximum pressure of 2,000 psi.
Track-Etched Membranes and Applications
Genizer Track-Etched Membranes with pore sizes from 30 nm to 3 micrometers, diameters from 19 to 293 mm, extrusion principle, and application examples.
Genizer Track-Etched Membranes are compatible with the Genizer liposome extruder portfolio rather than being limited to a single model. Pore sizes include 30, 50, 80, 100, 200, 400, and 800 nm, plus 1, 2, and 3 μm. Available diameters are 19, 25, 47, 90, 142, and 293 mm. This range supports membrane selection for particle-size control and process development. Application areas include cosmetic active nanoemulsions such as ceramides and vitamins, food and nutrition systems using plant polyphenols or flavor oils, phospholipid and unilamellar vesicle research, and composite or functionalized carrier development. Genizer can also support microjet coupling, intelligent control, and pharmaceutical-grade documentation for process-oriented workflows.